Technical Shafts for REKU-Pools

Technical shaft "Universal"

The Universal technical shaft fits the REKU composite pool (open at the bottom). A ventilator is installed for ventilation, which is controlled by a hygrostat. The lid can be adjusted in height to match the panel or wooden covering all around.

Dimensions (L x W x H): 1.5 x 1.7 x 1.5 m
Lid opening dimensions: 1,245 x 765 mm
Request dimension drawing!

Art. No.: K Uni 150.. .

€ 3.756,–

Surcharge for large cover in all staircase colours
(lid in colour papyrus, please specify desired colour when ordering)

€ 133,–

Surcharge for cover as shower tray (BRW)

€ 138,–

All prices in Euro, excl. VAT. Valid from 01.01.2023 (until cancelled).

Technology shaft with fan and adjustable cover

Lid versions

(Please indicate lid type and colour when ordering. Lid in papyrus (light grey), other colours are possible in all stair colours.)

shaft cover with non-slip coating — **Visible cover with non-slip coating (DK):** Screwed visible cover with non-slip coating. Covering has a "slip-resistant certificate" for wet areas. Liftable with two gas pressure dampers and two handles.

smooth lid for wooden covering technical shaft — **Lid smooth for wooden covering (FLW):** Same lid suitable for wooden covering (on-site), not suitable for stone covering, as the lid is frequently opened.

Technical shaft lid as shower tray — **Lid as shower tray (BRW):** As shower tray with non-slip coating, incl. drain set with two gas pressure dampers and two handles.

Application examples

Technical shaft for pools without roller shutter — Technology shaft Universal for swimming pools without roller shutter

Technical shaft for pools with roller shutter — Technology shaft Universal for swimming pools with Integra roller shutter

Technical shaft for counter current system

Suitable for the composite pool, with drip water drain at the bottom, 2-4 adjustment supports for screwing onto the concrete slab. Built-in fan for ventilation, controlled by a hygrostat.

For counter current system short for mounting on pool - underside with upper cut-out for roller shutter edge, incl. 2 adjustment supports
Internal dimensions (L x W x H): 1.050 x 600 x 700 mm deep Art. No.: K TS720GSA1050 B 03 K	€ 1.004,–
Internal dimensions (L x W x H): 1.250 x 600 x 700 mm deep Art. No.: K TS720GSA1250 B 03 K	€ 1.311,–
Internal dimensions (L x W x H): 1.500 x 600 x 700 mm deep Art. No.: K TS720GSA1500 B 03 K	€ 1.617,–
For counter current system long for mounting on the stair side with cut-out** for the stairs, incl. 4 adjustment supports
Internal dimensions (L x W x H): 2.015 x 600 x 700 mm Art. No.: K TS720GSA2000 03 L	€ 2.009,–

To be able to securely attach the plates to the housing, plastic latches are supplied, these are attached at a distance of 25 cm and can be removed if necessary. A plastic plate is hung over the pump to prevent the water from dripping through. Supply and exhaust air with duct pipe Ø 90 mm on site.

** The cut-outs for stairs by the long technical shaft for counter swim unit are cut out in the factory depending on the type of staircase.

All prices in Euro, excl. VAT. Valid from 01.01.2023 (until cancelled).