Easy to assemble and chic in design
Fibreglass reinforced plastic (GRP) is a modern composite material in which the synthetic resin epoxy acrylate is reinforced by fibreglass. This combination of two materials unites the advantages of both materials: the high strength of glass and the chemical resistance of epoxy acrylate.
REKU composite pools are therefore waterproof, extremely weather-resistant and insensitive to frost and heat. The particularly light and easily mouldable GRP materials are predestined for swimming pool construction and enable you to enjoy your swimming pool for a long time to come. REKU offers a selection of different prefabricated pools in different sizes and configurations.
SINGLE „S“
New series 2.70 m wide!
One-piece swimming pool made of epoxy acrylate
5 pool steps with non-slip profiled surface on the right side of the pool with a generous seating area allowing the installation of a counter current unit and massage jets to the back wall. Pool with 6 degree wall incline and roller shutter safety ledge with integrated steel beam. Pool with 3 cm insulation in the floor and structural profiles in the side walls.
Measurements
SINGLE „S“ 550 : 5,50 x 2,70 x 1,50 m
SINGLE „S“ 700 : 7,00 x 2,70 x 1,50 m
TWIN
One-piece swimming pool made of epoxy acrylate
Double-sided 4-stage staircase with a generous swimming area in the centre, built-in wall for the installation of counter swimming and massage systems, pool with 6° wall inclination, roller shutter safety edge with integrated steel frame. Basins with 3 cm insulation in the bottom and profiles in the side walls.
Measurements
TWIN 700 : 7,00 x 3,20 x 1,50 m
TWIN 800 : 8,00 x 3,20 x 1,50 m
TWIN 745 : 7,45 x 3,70 x 1,50 m
TWIN 845 : 8,45 x 3,70 x 1,50 m
TWIN 945 : 9,45 x 3,70 x 1,50 m
TWIN „S“
One-piece swimming pool made of epoxy acrylate
5-stage staircase on both sides with generous seating and sunbathing step in the centre, built-in wall for installation of counter swimming and massage systems, pool with 6° wall inclination, roller shutter safety edge with integrated steel frame, pool with 3 cm insulation in the floor and profiles in the side walls.
Measurements
TWIN „S“ 700 : 7,00 x 3,20 x 1,50 m
TWIN „S“ 800 : 8,00 x 3,20 x 1,50 m
TWIN „S“ 745 : 7,45 x 3,70 x 1,50 m
TWIN „S“ 845 : 8,45 x 3,70 x 1,50 m
TWIN „S“ 945 : 9,45 x 3,70 x 1,50 m
ELEGANZ
New model! With shallow water zone „Lounge“
One-piece swimming pool made of epoxy acrylate
Floating 5-step Eleganz staircase, can be positioned on the left or right, mounted against the wall. In the design with the shallow water zone, the Eleganz staircase has 4 steps with a non-slip profiled surface. The area next to the stairs is suitable for the installation of a counter current unit. A roller shutter safety ledge and an integrated steel frame are located below the roller shutter edge. The pool is equipped with 3 cm insulation in the floor and structural profiles in the side walls.
Measurements
ELEGANZ 550 : 5,50 x 3,20 x 1,50 m
ELEGANZ 650 : 6,50 x 3,20 x 1,50 m
ELEGANZ 600 : 6,00 x 3,70 x 1,50 m
ELEGANZ 700 : 7,00 x 3,70 x 1,50 m
ELEGANZ 800 : 8,00 x 3,70 x 1,50 m
MODENA 520
in three depths
One-piece swimming pool made of epoxy acrylate
4-step staircase with a non-slip profiled surface and a spacious seating and lounging area. 6 degree wall slope and roller shutter safety ledge with integrated steel frame. The pool is equipped with 3 cm insulation in the floor and structural profiles in the side walls. Built-in pool for stationary installation with concrete backfilling or in a self-supporting design with frame for technical support with wooden floor for all depths.
Measurements
MODENA 520/1500 : 5,20 x 2,40 x 1,50 m
MODENA 520/1250 : 5,20 x 2,40 x 1,25 m
MODENA 520/1050 : 5,20 x 2,40 x 1,05 m
MARINA
Prefabricated swimming pool made of epoxy acrylate
4-step bathroom staircase with slip-resistant profiled surface in the corner. Roller shutter safety edge and steel frame are integrated below the roller shutter edge. Basins with 3 cm insulation in the floor and profiles in the side walls.
Measurements
MARINA 600 : 6,00 x 3,20 x 1,40 m
MARINA 900 : 9,00 x 3,20 x 1,40 m
TWIN „S“ XTRA
The prefabricated swimming pool in premium quality
The basin body is made of fibreglass-reinforced plastic and has an insulated basin floor made of polyurethane rigid foam with GRP coating. In the walls there are steel reinforcements as well as in the supporting edge for the swimming pool cover. The staircase with five profiled steps on each side allows easy access to the pool. The beach zone and the seating areas between the stairs offer many possibilities for relaxing in different water depths.
A seat step or a roller shutter shaft can optionally be installed on the opposite end.
Measurements
TWIN „S“ XTRA 750 : 7,50 x 3,20 x 1,50 m
TWIN „S“ XTRA 850 : 8,50 x 3,20 x 1,50 m
Colour combinations
The colour of the steps can be the same or optically contrasting with the pool colour. This makes it easier to recognise the steps for safe access.
| Pool colour | White | Sea blue | Sand | Papyrus | Silver grey | Granolith stonegrey |
| Step colour | white (03) | sea blue (04) | sand (13) white (12) | papyrus (19) | silver grey (22) | granolith stonegrey (40) |
NOTE: Every surface colour loses intensity over time, due to weathering, UV radiation, Influences of water chemistry etc. This is a normal process, but it is more visible with dark colours than with light colours. These colour differences are hardly or not at all visible when the pool is full - at most in the area of the air-water edge. When the pool is empty, however, these appear. These colour differences do not affect the life or durability of the pool in any way and they are not reason for complaint. See also DIN 16582-1 2015 Appendix D “Aesthetic aspects of one-piece GRP pools”.
Transport
Our special vehicles are equipped with a loading crane. The reach of the crane systems is 13.7 metres for a pool weight of 1000 kg.
It is always possible to unload the swimming pools next to the vehicle. In many cases it is not possible to unload the swimming pools directly into the pit if the construction site is difficult to access or if the distance to the pit is too long. In such cases a regional truck crane is necessary.
Please arrange the details with our disposition in advance. In case of doubt, our drivers may be able to visit the construction site in advance in order to assess the unloading possibility.
Our prefabricated swimming pools
MOUNTING COSTS
Prices for assembly on the construction site and the required assembly material are not included in this price list. These services are performed by a specialist company and invoiced separately.
TRANSPORT COSTS
The indicated prices are valid "ex works". The transport costs include the freight and insurance up to the accessible property boundary of the consignee. Special costs, such as customs and marginal costs, ferry, etc., shall be borne by the consignee. Transport on the property must be organised by the customer and is also at the expense of the consignee. The use of our truck crane system is not included in the transport costs.
PRICE SETTING
The prices in this list apply only to orders received by us by 31-12-2021. If the goods are accepted later, the list prices valid on the day of delivery will be credited. The prices are sales prices without VAT.
TYPES OF SWIMMING POOLS
STANDARD – The basin body is available in all colour combinations and also with contrasting coloured steps, with complete equipment package or cut-out set for your built-in parts and also with Integra roller shutter cover. Pool with 3 cm insulation in the floor and structural profiles in the side walls.
CLASSIC – Basins with the same equipment options as "Standard", but fully insulated with 2 cm PU foam in the walls.