Technical Shafts


Mounting shaft GSA & "Universal"


Mounting shaft for counter current system

Suitable for the styrofoam pool, with dripping water drain at the bottom, 2 adjustment supports for screwing onto the concrete slab. Built-in ventilation with fan and hygrostat.

In order to be able to securely attach the plates to the housing, plastic latches are supplied, these are attached at a distance of 25 cm and can be removed if necessary. A plastic plate is hung over the pump to prevent the water from dripping through.

Price schedule

External dimensions (L x W x H): 1.050 x 800 x 751 mm
Art. No.: K TS720GSA1050 GW 03 K

€ 820,–

External dimensions (L x W x H): 1.250 x 800 x 751 mm
Art. No.: K TS720GSA1250 GW 03 K

1.070,–

External dimensions (L x W x H): 1.500 x 800 x 751 mm
Art. No.: K TS720GSA1500 GW 03 K

1.320,–

 

All prices in Euro, excl. VAT. Valid until 31-12-2021.
 From May 10, 2021 8% price increase due to the negative consequences of the global pandemic.

Technical shaft „Universal“

Technical shaft "Universal" suitable for straight swimming pool walls, concrete, styro, metal etc., open at the bottom.

  • Ventilation with fan and hygrostat installed.
  • The lid can be adjusted in height to match the panel or wooden covering all around.

Price schedule

 
Measurements: 1700 mm x 1700 mm x 1500 mm
 
Lid opening dimensions: 1245 mm x 765 mm
 
€ 3.096,–
Surcharge for cover, available in all stair colours (please specify desired colour when ordering)106,–
Surcharge for cover as shower tray114,–

 

All prices in Euro, excl. VAT. Valid until 31-12-2021.
 From May 10, 2021 8% price increase due to the negative consequences of the global pandemic.

Version 1

Inspection cover with non-slip coating has non-slip certificate for wet areas (can be opened with 2 gas pressure dampers, 2 handles).

Version 2

Same cover as item 1. without non-slip coating for wooden coating on site.

Version 3

Lid as shower tray with non-slip coating incl. drain set with 2 gas pressure dampers and 2 handles.

Built-in wall with technology shaft for counter current system

Built-in wall with integrated technology shaft in which countercurrent system or underwater spotlights can be installed.
Technical shafts are equipped with aeration and ventilation nozzles, as well as with a dripping water drain. Suitable for installation in straight swimming pool walls, concrete, styro, metal etc., 2 adjustment supports for screwing onto the concrete slab.

The lower part of the installation wall can be shortened at the factory and thus this part can be used as a closed technology shaft for underground installation, away from the pool.

If desired, please specify when ordering!

Price schedule

 

Measurements: 

  • Wall 1000 mm wide, 1500 mm high, can be shortened to 1200mm
  • Technical shaft for counter current system 700 mm deep

Dimensions lid opening: 765 x 745 mm

 
€ 1.074,–
Surcharge for cover, available in all staircase colours (cover in papyrus, please specify desired colour when ordering)95,–
Surcharge for cover as shower tray99,–
Foil packaging with wooden pallet53,–

 

All prices in Euro, excl. VAT. Valid until 31-12-2021.
 From May 10, 2021 8% price increase due to the negative consequences of the global pandemic.